[Double King Knowledge Base - Diaphragm Valve Knowledge]
- Clicks: 634 Release time: 2010/10/20
Diaphragm valves are a special form of shut-off valve. Its opening and closing member is a diaphragm made of soft material, which separates the valve body cavity from the bonnet inner cavity and the driving component, so it is called a diaphragm valve.
The characteristics of the diaphragm valve are as follows: The outstanding feature of the Zui is that the diaphragm separates the lower valve body cavity from the inner cavity of the upper valve cover, so that the valve stem, valve disc and the like located above the diaphragm are not corroded by the medium, and the packing sealing structure is omitted, and There will be no leakage of the media. 1. The separator made of soft seal such as rubber or plastic has good sealing performance. Since the diaphragm is a consumable part, it should be replaced periodically depending on the characteristics of the medium. 2 , limited by the diaphragm material, the diaphragm valve is suitable for low pressure and relatively low temperature. 3 , diaphragm valve can be divided into: house diaphragm valve, DC diaphragm valve, cut-off diaphragm valve, straight-through diaphragm valve, gate diaphragm valve and right-angle diaphragm valve; the connection form is usually flange connection ( Quick connection ) ; According to the driving method, it can be divided into manual, electric and pneumatic. The pneumatic drive is divided into three types: normally open, normally closed and reciprocating. The diaphragm valve uses a valve stem to press the elastomer film against the valve seat to block the air path. Turning the handwheel can move the valve stem up and down, so that the diaphragm leaves the valve seat to open the valve or press the diaphragm against the valve seat to close the valve. Such valves are made of nitrile rubber diaphragm ( silica diaphragm , EPDM, etc. ) and are suitable for non-corrosive gases on pre-stage and pre-extraction pipelines and at temperatures between -25 and 80 °C. If a fluororubber diaphragm is used, it can be used in high vacuum systems with a temperature range of -30 to 150 °C.
[ print ] [ back to top ] [ close ]ICU Arm bridge for the hospital ICU wards, intensive care unit of modern medical rescue necessary auxiliary equipment ,mainly by the bridge dry and wet sections, characterized by the separation of wet and dry is reasonable structure ,allocation of landing and taking off the wet paragraph flexible and fluid infusion pump rack frame and infusion pump mount .
Paragraph can be equipped with wet and dry conditioning off and landing platform for the medical care equipment ,in the segment, respectively ,of wet and dry oxygen, air attracted by strength of electricity ,the network input terminals can be configured in the health care workers and staff body of tower.
The moving parts adopts Damping Friction Brake system, while also matching your request in accordance with paging communications ,monitoring ,video telephony, background music ,as well as teaching and long-distance diagnosis system.
Double Arm Electric Medical Pendant
Double Arm Electric Medical Pendant,Ceiling Pendant,Double Pendant Light,Electric Medical Pendant
Shandong Kang'erjian Medical Technology Ltd. , https://www.operatingtable.nl