Pumps (pumps) widely used in rural areas, such as centrifugal pumps, axial pumps, submersible pumps, mixed-flow pumps, etc., have problems in use, such as burning, high energy consumption, and high repair costs, which increase the economic burden on users. Therefore, I would especially like to awaken my peasant friends.
Matching power power and pump power rating must match. The number of kilowatts of power required for a pump is clearly stated on the pump's nameplate. If it is not matched, the power of the power is too high, it will cause a "big horse-drawn car", a waste of power and increase the cost; on the contrary, there will be "small horse-drawn carts" with insufficient water flow or overload and damage to the parts. , unable to work properly.
When starting the pumping of the new machine, first wipe off the protective oil on the pump shaft and other parts. Carefully check whether the rotation of the impeller is normal, whether the rotation of the pump shaft is flexible, whether the bearing clearance is appropriate, whether the gasket between the joint surfaces of the pump body is damaged, and whether the connection of each component is firm and whether the water leaks. If there is a problem, it should be repaired in time.
Water pump and power machinery must be firmly installed. Make the water pump shaft parallel to the power machine shaft; when installing the belt, pay attention to the loose side of the belt to increase the transmission work efficiency.
Drive the pump with the motor to pump water. It is forbidden to start the two pumps at the same time on the same line to prevent the current of the line from being too large to burn out the motor.
It is necessary to promptly check whether the water pump inlet valve is blocked by weeds. Pay attention to whether the flow of water is normal. Once you find a problem, you should immediately eliminate it and ensure normal operation.
To stop the pump, you must close the pressure valve before stopping and remove the belt. If there is no need to stop for a long time, the whole machine should be cleaned up and the water in the pump should be completely discharged. For the easily corroded parts and spare parts, apply protective oil to prevent rust.
Pvc Glove,Disposable Vinyl Clear Gloves,Disposable Sterile Pvc Gloves,Disposable Transparent Sterile Pvc Gloves
BIQIAO MEDICAL TECHNOLOGY(HENAN) CO.,LTD , https://www.medical-technology.net