Daily maintenance and maintenance of the incubator 1. Digital light incubator
1. The incubator housing should be reliably grounded.
2. The incubator should be placed in a cool, dry, well-ventilated place away from heat and sunlight. Place it smoothly to prevent noise from occurring.
3. In order to ensure the effective heat dissipation of the condenser, the distance between the condenser and the wall should be greater than 100mm, the side of the box should have a gap of 50mm, and the top of the box should have at least 300mm space.
4. During the handling, maintenance and maintenance of the incubator, avoid collision, shaking and shaking, and the large inclination of Zui is less than 45 degrees.
5. The instrument suddenly does not work. Please check if the fuse tube (after the box) is burnt out and check the power supply.
6. When the incubator is working in refrigeration, it is not advisable to make the difference between the temperature inside the box and the ambient temperature greater than 25 degrees.
7. The illumination time can be programmed by the programmable time controller and control the time. For the programming method, please refer to the instructions of the programmable time controller.
Second, the digital display biochemical incubator
1. Observe the temperature of the incubator daily to meet the requirements. If you find an abnormal situation, please ask a professional to repair it.
2. When the lighting in the box is abnormal, it is necessary to replace the lighting fixtures in time.
3. Check if the heating furnace wire (compressor) is damaged when the heating (cooling) is abnormal, and repair it in time after damage.
4. Clean the outside of the incubator in time to keep it clean and free of dust. Thoroughly clean the incubator liner once a week with sterile water. Replace different types of disinfectant water every quarter to avoid the emergence of resistant strains.
5. A performance verification of this equipment should be performed annually.
6. Carefully check that the power supply voltage matches the instrument requirements before using the equipment.
7. When the device is not in use, set each control switch to a non-working state and cut off the power.
As a traditional Chinese sauce,Lishida Spare Rib Sauce is perfect for pan frying meats,spare rib,seafood and vegetables.Also,it is a great choice when you are barbecuing.To enhance the taste of dishes,you could also use it for dipping,such as pork,dumplings and so on.
Pork Sauce,Chinese Rib Sauce,Chinese Spare Rib Sauce,Spare Rib Barbecue Sauce
KAIPING CITY LISHIDA FLAVOURING&FOOD CO.,LTD , https://www.lishidafood.com