Brooding cage introduction

Brooding cages are generally divided into young chick cages (0-40 days old) and broiler cages (41-140 days old). Under normal circumstances, in order to save the house and facilitate the management of heating, overlapping cages are often used.
Here is an example: 1 A four-layer overlapping chickling cage used in Shaoxing chicken farm. The length, width and height of a single cage are 100 cm X 50 cm X 30 cm. The height of the caged foot is 15 cm and the distance between cages is 14 cm. The cage side wall, back wall mesh is 25mm X 25mm, the cage bottom mesh is 12.5mm X 12.5mm, and the cage door clearance is adjustable in the range of 20mm X 30mm. The total height of the four-layer cage is 1.86 meters. Each single cage can accommodate 20 young chicks, each chick occupying an area of ​​250 square centimeters.
Breeding cages: Breeding cages is basically the same as laying cages. Its monomer cage has a length X width X height 80 cm X 40 cm X 40 cm, sidewall mesh 25 mm X 25 mm, cage bottom mesh 40 mm X 20 mm, two doors in front of the cage, each cage door width 37 cm. The gap between the gates is 40 mm X 45 mm. Lo bred for chickens per cage. Each chicken has a cage area of ​​320 square centimeters. In order to facilitate the group transfer, integrated or semi-stepped cages are generally used.

Disposable Medical Sheet

Disposable Drape Sheets,Disposable Medical Sheet,Disposable Medical Bed Sheets,Disposable Hospital Bed Sheets

Henan Anbang Medical Supplies Co., Ltd. , https://www.anbangmedical.com

Posted on