In the production of pigs, there are many artificial ingredients. The feed needs to be mixed during the transition. The ingredients are mixed when adding the ingredients, and the ingredients are required when using the wet ingredients. However, the uneven appearance of the ingredients often occurs in the production. Time-consuming and laborious phenomenon, the following I will experience the spices and self-thinking a more reasonable way of mixing materials are described below:
First, the transition spices
Due to the fact that the ratio of the material needed for the transition is small, the pyramid mixing method can be adopted. This method is widely used before the mixer is used. The specific operations are as follows:
Pyramid mixing method: First, according to the number of raw materials in order from bottom to top piled up uniformly to form a pyramid-shaped circular table, the most raw materials in the bottom layer, the least in the top layer, and then fell from one side to a new round of Taiwan. After artificial stirring and feed flow, generally 6 to 8 times can be evenly mixed. This method is simple and practical, and is suitable for use in the case of a large number of large quantities of raw materials.
Second, when adding chemicals to the material, it is not appropriate to adopt the pyramid method because the proportions of the two parties are too different. Instead, a gradual multiple dilution method should be adopted: this is a method that is used when the mixture contains few or trace components. For example, if 100 g of medicine is added to 10 kg of material, first mix 100 g of drug with 100 g of feed, and then mix the 200 g of the mixture with 200 g of feed and turn it into 400 g. This is followed by feeding until all Mix well.
This method can ensure the uniformity of the mixing, but it is a bit tedious; however, if the medicine is not uniform in the material, it will seriously affect the effect of treatment or prevention, and even drug poisoning may occur, so it is necessary to take some trouble.
Third, wet mix mixing method: This work is the work that most pig farms are doing every day. Our experience is to change the way people add water first after loading materials, but instead add water after adding water; It is heavier than water, and the water below will continue to infiltrate upwards. The first benefit is that the water-filled material and the material truck have low friction and are easy to turn; the second is that there will be no dead angle; if the water is discharged and the material is stopped for a while, More effort.
5 Axis Cad Cam Dental Milling Machine is the champion in dental field. The Dental Milling provides dynamic flexibility with a built-in, 5-axis dental automation system and an "open" architecture that integrates with virtually any scanner and CAD/CAM software. This provides the user with the agility to produce a wide range of dental restoration components based on demand -- including crowns, bridges, abutments, implant-carried resorations. Plus, the JD-MT5 accommodates and supurbly machines a variety of dental materials including titanium, chrome-cobalt, zirconium and more! The JD-MT5 was developed specifically and exclusively for dental milling applications. All specifications from machine size to performance were designed for the efficient handling and milling of dental blanks (or material pucks). the the Cnc Dental Milling Machine will can satisfy all your need.
Dental Milling,Cad Cam Milling Machine,5 Axis Cad Cam Dental Milling Machine,5 Axis Cad Cam Dental Milling Machine
Shandong Carved Intelligent Technology Group Co.,Ltd , https://www.demetdent.com